Professional Automotive Repair Guides, Calculators & Technical Resources
Complete Guide: Land Rover Discovery Sport Engine Oil Capacity & Calculator
Introduction to Land Rover Discovery Sport Oil Specifications
The Land Rover Discovery Sport, since its introduction in 2014, has established itself as a premium compact SUV combining luxury with off-road capability. A critical aspect of maintaining this vehicle’s performance and longevity is understanding its precise engine oil requirements. This comprehensive guide provides detailed information about oil capacities, specifications, and maintenance procedures for all Discovery Sport models.
Key Fact: Using incorrect oil specifications or quantities in your Discovery Sport can lead to reduced engine performance, increased fuel consumption, and potential voiding of your manufacturer’s warranty. Land Rover engines are precision-engineered and require specific oil formulations.
Engine Generations and Model Year Specifications
The Discovery Sport has evolved through several generations, each with specific engine configurations and oil requirements. Understanding these variations is essential for proper maintenance.
2.1 First Generation (2015-2018)
The initial Discovery Sport models featured Ford-derived 2.0L Si4 petrol engines and early Ingenium diesel units. These engines typically required 5W-20 or 5W-30 synthetic oil meeting Land Rover specification STJLR.51.5122. The oil capacity for these models ranges from 5.7 to 6.9 liters depending on engine type and whether an oil filter change is performed.
2.2 Facelift Models (2019-2022)
Refreshed models introduced updated Ingenium engines with improved efficiency. These models transitioned to 0W-20 synthetic oil meeting the newer STJLR.03.5006 specification. The reduced viscosity improves cold-start performance and fuel economy while maintaining protection at high temperatures.
2.3 Current Generation (2023-Present)
The latest models feature further refined Ingenium engines and the introduction of plug-in hybrid (PHEV) variants. These continue with 0W-20 specifications but with enhanced additive packages for improved engine protection and emissions system compatibility.
Detailed Oil Capacity Specifications
| Engine Type | Model Years | Oil Capacity (Liters) | Oil Capacity (Quarts) | Specification |
|---|---|---|---|---|
| 2.0L Ingenium Petrol P200/P250 | 2015-2018 | 6.2 – 6.5 | 6.55 – 6.87 | 5W-20 (STJLR.51.5122) |
| 2.0L Ingenium Petrol P200/P250 | 2019-2022 | 6.2 – 6.5 | 6.55 – 6.87 | 0W-20 (STJLR.03.5006) |
| 2.0L Ingenium Diesel D150/D180 | 2015-2018 | 6.9 – 7.2 | 7.29 – 7.61 | 5W-30 (STJLR.51.5122) |
| 2.0L Ingenium Diesel D150/D180/D240 | 2019-Present | 6.9 – 7.2 | 7.29 – 7.61 | 0W-20 (STJLR.03.5006) |
| 1.5L 3-Cylinder PHEV (P300e) | 2019-Present | 4.8 – 5.1 | 5.07 – 5.39 | 0W-20 (STJLR.03.5006) |
| 2.0L Si4 Petrol (Pre-Ingenium) | 2015-2018 | 5.7 – 6.0 | 6.02 – 6.34 | 5W-20 (STJLR.51.5122) |
Understanding Land Rover Oil Specifications
4.1 STJLR.51.5122 Specification
This specification was introduced for earlier Ingenium engines and requires synthetic oil with specific additive packages for:
- Enhanced wear protection for timing chains and components
- Improved fuel economy through reduced friction
- Compatibility with turbocharger systems
- Extended drain interval capabilities
4.2 STJLR.03.5006 Specification
The newer specification addresses evolving engine technology requirements:
- Lower viscosity for improved cold-start protection
- Enhanced compatibility with gasoline particulate filters (GPF)
- Improved protection against low-speed pre-ignition (LSPI)
- Extended service intervals up to 21,000 miles or 24 months
Proper Oil Check and Change Procedures
5.1 Electronic Oil Level Check
Modern Discovery Sport models feature an electronic oil level monitoring system. To obtain an accurate reading:
- Ensure the vehicle is on level ground
- Start the engine and allow it to reach normal operating temperature
- Turn off the engine and wait 2 minutes
- Access the oil level display through the instrument cluster menu
- The system will display “Oil Level OK” or indicate if oil needs to be added
5.2 Oil Change Procedure
When performing an oil change, follow these critical steps:
- Warm the engine to operating temperature to ensure complete drainage
- Always replace the drain plug washer (part number LR032362)
- Use only genuine Land Rover oil filters (part number varies by model)
- Reset the oil life indicator through the vehicle information system
- Dispose of used oil properly at a certified recycling facility
Frequently Asked Questions (FAQ)
Using incorrect oil viscosity can lead to several issues: Thicker oil than specified (e.g., 5W-30 instead of 0W-20) may cause poor cold-start performance, reduced fuel economy, and inadequate protection during initial startup. Thinner oil may not provide sufficient protection at high temperatures. Modern Land Rover engines have tight tolerances and require specific viscosities for optimal performance and warranty compliance.
Land Rover recommends checking the oil level at least once per month or before long journeys. Modern engines with turbochargers and advanced emission systems can consume small amounts of oil under normal operation. The electronic oil level monitoring system provides accurate readings when the engine is at operating temperature on level ground. For vehicles used for towing or in severe conditions, more frequent checks are advisable.
While modern synthetic oils and engine technology allow for extended intervals, exceeding manufacturer recommendations is not advisable. Land Rover’s intervals (typically 12 months or 16,000 miles) account for various factors including oil degradation, contaminant accumulation, and additive depletion. Extended intervals may void warranty coverage and can lead to accelerated engine wear, particularly in vehicles used for short trips, towing, or in extreme conditions.
The main difference is cold-temperature performance. The “0W” or “5W” indicates the oil’s viscosity at low temperatures (the “W” stands for winter). 0W-20 flows better in extremely cold conditions, providing faster lubrication during cold starts. Both oils have the same viscosity at operating temperature (20). Newer Discovery Sport models specify 0W-20 for improved fuel economy and emissions performance. Always use the viscosity specified in your owner’s manual.
While aftermarket filters may fit, genuine Land Rover filters are specifically engineered for your vehicle’s requirements. They feature: Correct bypass valve pressure settings, proper anti-drainback valves to prevent dry starts, specific filtration media that meets Land Rover’s contamination standards, and exact dimensions to ensure proper sealing. Using non-genuine filters may affect oil flow, filtration efficiency, and potentially void warranty coverage if related engine damage occurs.
Important Disclaimer: The information provided in this guide and calculator is for informational purposes only. Always refer to your vehicle’s official owner’s manual for precise specifications and maintenance procedures. Vehicle specifications may vary based on model year, market, and optional equipment. 24car-repair.com is not affiliated with Jaguar Land Rover Limited and assumes no liability for damages resulting from the use of this information. For warranty purposes, always have maintenance performed by qualified technicians using approved parts and fluids.
