Dodge Grand Caravan Engine Oil Capacity Calculator
Accurate oil capacity calculator for all Dodge Grand Caravan models (2008-2020). Get exact specifications, recommended oil types, and DIY maintenance tips.
3.0 – Oil Capacity Calculator
3.2 – Calculation Results
Professional Mechanic Tip
Always warm up your engine for 5 minutes before draining oil. Warm oil flows better and removes more contaminants. Check oil level 5 minutes after shutting off engine to allow oil to settle in the pan.
4.0 – Complete Dodge Grand Caravan Oil Specifications (2008-2020)
The Dodge Grand Caravan oil capacity varies significantly between engine generations. Below are the complete specifications for all models:
| Model Years | Engine | Oil Capacity (with filter) | Oil Capacity (without filter) | Recommended Oil Type | Oil Filter Part # |
|---|---|---|---|---|---|
| 2011-2020 | 3.6L Pentastar V6 | 5.5 quarts (5.2 liters) | 5.0 quarts (4.7 liters) | Full Synthetic 5W-20 | MO-899 |
| 2008-2010 | 3.8L V6 | 4.5 quarts (4.3 liters) | 4.0 quarts (3.8 liters) | Synthetic Blend 5W-20 | PH-16 |
| 2008-2010 | 3.3L V6 | 4.5 quarts (4.3 liters) | 4.0 quarts (3.8 liters) | Conventional 5W-20 | PH-16 |
Critical Warning
Overfilling Prevention: Never exceed the recommended oil capacity. Overfilling by as little as 1 quart can cause oil foaming, reduced lubrication, and potential engine damage. Always add oil gradually and check the dipstick frequently during refilling.
5.0 – Step-by-Step DIY Oil Change Guide
Changing the oil in your Dodge Grand Caravan is a straightforward process that can save you significant money. Follow these detailed steps:
5.1 – Tools & Materials Required:
- 5.5 quarts of 5W-20 synthetic oil (for 2011+ models)
- Oil filter (MO-899 for 3.6L, PH-16 for 3.3L/3.8L)
- Oil filter wrench
- 15mm socket for drain plug
- Jack and jack stands or ramps
- Oil drain pan (6+ quart capacity)
- Funnel
- Torque wrench (recommended)
- Shop towels and gloves
5.2 – Procedure Steps:
- Engine Warm-up: Run engine for 5-10 minutes to warm oil
- Vehicle Elevation: Safely raise vehicle using jack stands or ramps
- Drain Oil: Remove drain plug with 15mm socket, allow complete drainage (15-20 minutes)
- Filter Replacement: Remove old filter using filter wrench, lubricate new filter gasket with fresh oil
- Drain Plug: Reinstall drain plug with new washer, torque to 20 ft-lbs
- Refill Oil: Add recommended amount of oil (use calculator above)
- Final Check: Start engine, check for leaks, verify oil pressure light goes off
- Level Verification: Shut off engine, wait 5 minutes, check dipstick level
5.3 – Oil Life Reset Procedure:
After oil change, reset the oil life monitor: Turn ignition to ON (don’t start engine). Press accelerator pedal slowly 3 times within 10 seconds. Turn ignition off. Start engine to verify reset.
