24car-repair.com
Comprehensive Nissan Kicks Engine Oil Capacity Guide with Interactive Calculator
Understanding Nissan Kicks Engine Oil Specifications
The Nissan Kicks, introduced in 2016 for global markets and arriving in the United States in 2018, is equipped with Nissan’s reliable HR16DE engine. This 1.6-liter 4-cylinder engine requires specific oil capacity and viscosity to maintain optimal performance, fuel efficiency, and engine longevity.
Nissan Kicks Oil Capacity Calculator
Use the interactive calculator below to determine the exact oil capacity for your specific Nissan Kicks model year and configuration. The calculator accounts for engine type, oil viscosity, and whether you’re replacing the oil filter.
Oil Capacity Calculator
0W-20 is factory-recommended for optimal fuel economy
Oil filter adds approximately 0.2 quarts to total capacity
Calculation Results
Complete Nissan Kicks Oil Capacity Specifications
The table below provides detailed specifications for all Nissan Kicks model years available in the United States market. Note that international markets may have different specifications, particularly for turbocharged variants.
| Model Year | Engine Code | Displacement | Oil Capacity (qts) | Oil Capacity (L) | Recommended Oil | Filter Included |
|---|---|---|---|---|---|---|
| 2024 | HR16DE | 1.6L I4 | 4.4 qts | 4.2 L | 0W-20 Synthetic | Yes |
| 2023 | HR16DE | 1.6L I4 | 4.4 qts | 4.2 L | 0W-20 Synthetic | Yes |
| 2022 | HR16DE | 1.6L I4 | 4.4 qts | 4.2 L | 0W-20 Synthetic | Yes |
| 2021 | HR16DE | 1.6L I4 | 4.4 qts | 4.2 L | 0W-20 Synthetic | Yes |
| 2020 | HR16DE | 1.6L I4 | 4.4 qts | 4.2 L | 0W-20 Synthetic | Yes |
| 2019 | HR16DE | 1.6L I4 | 4.4 qts | 4.2 L | 0W-20 Synthetic | Yes |
| 2018 | HR16DE | 1.6L I4 | 4.4 qts | 4.2 L | 0W-20 Synthetic | Yes |
Step-by-Step Oil Change Procedure for Nissan Kicks
Changing the oil in your Nissan Kicks is a straightforward process that can be completed in approximately 30-45 minutes with basic tools. Follow this detailed procedure for optimal results.
3.1 Preparation and Safety
- Ensure vehicle is on level ground and engine is cool (warm, not hot)
- Gather materials: 4.4 quarts 0W-20 synthetic oil, oil filter (15208-9ED0A), drain pan, funnel, 14mm socket, oil filter wrench, gloves
- Use wheel chocks and engage parking brake for safety
3.2 Drainage Process
- Locate oil drain plug under engine (14mm bolt, front of oil pan)
- Place drain pan beneath plug and loosen with socket wrench
- Allow oil to drain completely (15-20 minutes for thorough drainage)
- Clean drain plug and replace washer if damaged
3.3 Filter Replacement
- Locate oil filter on front of engine block (accessible from above on Kicks)
- Remove old filter using oil filter wrench, ensuring gasket comes off with filter
- Apply thin film of new oil to gasket of new filter
- Hand-tighten new filter (¾ turn after gasket contacts housing)
3.4 Refill and Verification
- Replace and tighten drain plug to 25-30 ft-lbs (33-41 Nm)
- Add 4.0 quarts of 0W-20 synthetic oil through filler cap on valve cover
- Start engine and let run for 1-2 minutes, then check for leaks
- Turn off engine, wait 3 minutes, then check dipstick and add oil as needed
- Reset oil change reminder light if equipped
Recommended Oil Types and Brands for Nissan Kicks
The Nissan Kicks requires specific oil specifications to maintain warranty coverage and ensure optimal engine performance. Below are the recommended oil types and reputable brands.
4.1 Viscosity Recommendations
- Primary Recommendation: 0W-20 full synthetic – Provides best fuel economy and cold-start protection
- Alternative for Warmer Climates: 5W-30 synthetic – Acceptable but may slightly reduce fuel economy
- Not Recommended: Conventional oil or viscosities outside Nissan specifications
4.2 Certification Requirements
- API Certification: API SP (latest) or API SN Plus (minimum)
- ILSAC Standard: GF-6A or GF-6B for fuel economy protection
- Nissan Approval: Genuine Nissan Motor Oil or equivalent meeting Nissan specifications
