24car-repair.com
Complete Technical Guide & Interactive Calculator for Infiniti Q60 Engine Oil Capacity
Comprehensive Infiniti Q60 Engine Oil Capacity Guide (2017-2022)
This complete technical guide provides detailed specifications, maintenance procedures, and an interactive calculator for determining the exact engine oil capacity of your Infiniti Q60. Covering all model years from 2017 to 2022 and both engine variants (3.0t and 3.7L V6).
1.0 Interactive Oil Capacity Calculator
Use our interactive calculator to determine the exact oil capacity for your specific Infiniti Q60 configuration. Select your model year and engine type below:
Infiniti Q60 Oil Capacity Calculator
–.- quarts
Approximate total with filter replacement
Select your model
Manufacturer recommended specification
2.0 Technical Specifications Database
2.1 Complete Oil Capacity Reference Table
| Model Year | Engine Type | Displacement | Oil Capacity (quarts) | Oil Capacity (liters) | Filter Included |
|---|---|---|---|---|---|
| 2022 | VR30DDTT 3.0t V6 | 3.0L | 5.9 quarts | 5.6 liters | Yes |
| 2021 | VR30DDTT 3.0t V6 | 3.0L | 5.9 quarts | 5.6 liters | Yes |
| 2020 | VR30DDTT 3.0t V6 | 3.0L | 5.9 quarts | 5.6 liters | Yes |
| 2019 | VR30DDTT 3.0t V6 | 3.0L | 5.9 quarts | 5.6 liters | Yes |
| 2018 | VR30DDTT 3.0t V6 | 3.0L | 5.9 quarts | 5.6 liters | Yes |
| 2017 | VQ37VHR 3.7L V6 | 3.7L | 6.1 quarts | 5.8 liters | Yes |
| 2017 | VR30DDTT 3.0t V6 | 3.0L | 5.9 quarts | 5.6 liters | Yes |
*Note: Capacities shown include oil filter replacement. Always verify with your vehicle’s specific manual.
3.0 Engine Technical Details
3.1 VR30DDTT 3.0L Twin-Turbo V6 Engine
- Production Years: 2017-2022 (Primary engine for Q60)
- Engine Code: VR30DDTT
- Displacement: 2,997 cc (3.0L)
- Configuration: 60-degree V6, twin-turbocharged
- Power Outputs: 300 hp (base) / 400 hp (Red Sport 400)
- Oil System: Wet sump with variable displacement oil pump
- Oil Pressure: 51 psi at 3,000 RPM (warm)
3.2 VQ37VHR 3.7L V6 Engine
- Production Years: 2017 (Early models only)
- Engine Code: VQ37VHR
- Displacement: 3,696 cc (3.7L)
- Configuration: 60-degree V6, naturally aspirated
- Power Output: 330 hp @ 7,000 RPM
- Oil System: Wet sump with conventional oil pump
- Redline: 7,500 RPM
4.0 Recommended Oil Specifications
4.1 Viscosity & API Standards
| Engine | Recommended Viscosity | Alternative Viscosity | API Classification | ACEA Standard |
|---|---|---|---|---|
| VR30 3.0t V6 | 0W-20 Full Synthetic | 5W-30 (extreme conditions) | API SN Plus / SP | A5/B5 |
| VQ37 3.7L V6 | 5W-30 Full Synthetic | 10W-30 (warm climates) | API SN / SP | A3/B3 |
5.0 Oil Change Procedure Guidelines
5.1 Step-by-Step Maintenance Procedure
- 5.1.1 Warm engine to operating temperature (approximately 10 minutes of driving)
- 5.1.2 Safely elevate vehicle and secure with jack stands
- 5.1.3 Remove oil drain plug (17mm socket) and allow complete drainage (15-20 minutes)
- 5.1.4 Replace drain plug washer and torque to 25-30 ft-lbs (34-41 Nm)
- 5.1.5 Remove old oil filter using appropriate filter wrench
- 5.1.6 Lubricate new filter gasket with clean oil and install hand-tight
- 5.1.7 Add specified amount of new oil through filler neck
- 5.1.8 Start engine and check for leaks, then verify oil level via dipstick
⚠️ Critical Safety Warning: Always allow the engine to cool sufficiently before beginning work. Hot oil can cause severe burns. Never work under a vehicle supported only by a jack.
Categories:
