Professional automotive guides, calculators, and repair resources
Honda Passport Engine Oil Capacity: Complete Guide & Calculator
Last Updated: | Reading Time: 8 minutes
The Honda Passport (2019-2024 models) with the 3.5L V6 engine requires 5.4 quarts (5.1 liters) of 0W-20 synthetic oil for a standard oil change with filter replacement. Use our calculator below for exact specifications based on your specific model and oil change type.
Honda Passport Oil Capacity Calculator
Get precise oil capacity for your specific Passport model and oil change type
Always verify with your owner’s manual before proceeding
Understanding Honda Passport Oil Specifications
The Honda Passport, reintroduced in 2019 after a hiatus, features Honda’s reliable 3.5-liter V6 engine across all trim levels. Proper oil maintenance is crucial for maintaining the vehicle’s performance, fuel economy, and longevity. This guide provides comprehensive information about oil capacities, types, and maintenance schedules.
Standard Oil Capacity by Model Year
All current-generation Honda Passport models (2019-2024) share the same fundamental oil capacity specifications due to their consistent use of the J35Y 3.5L V6 engine. However, slight variations may occur based on manufacturing dates and regional specifications.
| Model Year | Engine | With Filter (Quarts) | With Filter (Liters) | Oil Type | Change Interval |
|---|---|---|---|---|---|
| 2024 | 3.5L V6 | 5.4 qts | 5.1 L | 0W-20 Synthetic | 7,500-10,000 miles |
| 2023 | 3.5L V6 | 5.4 qts | 5.1 L | 0W-20 Synthetic | 7,500-10,000 miles |
| 2022 | 3.5L V6 | 5.4 qts | 5.1 L | 0W-20 Synthetic | 7,500-10,000 miles |
| 2021 | 3.5L V6 | 5.4 qts | 5.1 L | 0W-20 Synthetic | 7,500-10,000 miles |
| 2020 | 3.5L V6 | 5.4 qts | 5.1 L | 0W-20 Synthetic | 7,500-10,000 miles |
| 2019 | 3.5L V6 | 5.4 qts | 5.1 L | 0W-20 Synthetic | 7,500-10,000 miles |
Oil Capacity Variations by Change Type
The oil capacity varies depending on whether you’re replacing the oil filter and the completeness of the oil drain. Here’s a detailed breakdown:
| Change Type | Capacity (Quarts) | Capacity (Liters) | Description | When to Use |
|---|---|---|---|---|
| Standard Change (with filter) | 5.4 qts | 5.1 L | Complete oil drain with new filter | Regular maintenance (recommended) |
| Without Filter Change | 5.1 qts | 4.8 L | Oil drain only, reusing old filter | Top-up between changes (not recommended) |
| Dry Refill | 6.2 qts | 5.9 L | Complete empty engine refill | After engine rebuild or major service |
| Overhaul Capacity | 6.8 qts | 6.4 L | Includes oil cooler and lines | Complete engine overhaul |
Never exceed 5.4 quarts for a standard oil change with filter replacement. Overfilling can cause oil foaming, reduced lubrication, and potentially severe engine damage. Always check the dipstick after adding approximately 5 quarts, then add the remaining oil gradually while checking the level.
Recommended Oil Types and Specifications
Viscosity Requirements
Honda specifies 0W-20 synthetic oil for all Passport models. This viscosity provides:
- Cold weather performance: 0W rating ensures easy cold starts (down to -40°F)
- High temperature protection: 20 rating maintains proper viscosity at operating temperature
- Fuel economy: Lower viscosity reduces internal friction
- Engine protection: Maintains protective film under all conditions
Oil Quality Standards
Ensure your oil meets these industry standards:
| Standard | Description | Importance |
|---|---|---|
| API SP/SN Plus | Current API service category | Protects against low-speed pre-ignition |
| ILSAC GF-6 | International Lubricant Standard | Fuel economy and engine protection |
| Honda HTO-06 | Honda turbocharger protection | For turbocharged models (if applicable) |
| ACEA A5/B5 | European performance standard | High performance and extended drain |
While any 0W-20 synthetic meeting API SP standards will work, these brands are particularly recommended for Honda engines: Honda Genuine Oil (specifically formulated), Mobil 1 Extended Performance, Pennzoil Platinum, and Valvoline Modern Engine. All offer excellent protection for Honda’s VCM system.
Oil Change Procedure and Best Practices
Step-by-Step Oil Change Process
Follow this procedure for a proper oil change:
- Warm up engine: Run engine for 5-10 minutes to warm oil (not hot)
- Safety preparation: Use jack stands, wheel chocks, and safety glasses
- Drain oil: Remove drain plug and allow complete drainage (15-20 minutes)
- Replace filter: Remove old filter, lubricate new filter gasket with fresh oil
- Reinstall drain plug: Use new washer and torque to 30 ft-lbs (40 Nm)
- Refill oil: Add 5 quarts initially, then check dipstick and add remaining gradually
- Check for leaks: Run engine, check for leaks, verify oil level after shutdown
Torque Specifications
| Component | Torque (ft-lbs) | Torque (Nm) | Notes |
|---|---|---|---|
| Drain Plug | 30 ft-lbs | 40 Nm | Always use new crush washer |
| Oil Filter | Hand tight + ¾ turn | 7-10 Nm | Lubricate gasket before installation |
| Oil Pan Bolts | 16 ft-lbs | 22 Nm | If pan removal is necessary |
Frequently Asked Questions (FAQ)
No, Honda specifically recommends 0W-20 synthetic oil for all Passport models. Using thicker oil (5W-20 or 5W-30) can reduce fuel economy, potentially void warranty coverage, and may not provide optimal protection for Honda’s Variable Cylinder Management (VCM) system. In emergency situations only, 5W-20 may be used temporarily, but should be replaced with 0W-20 at the earliest opportunity.
Honda recommends oil changes every 7,500 to 10,000 miles or 12 months, whichever comes first, under normal driving conditions. For severe driving conditions (frequent short trips, extreme temperatures, towing, or dusty environments), reduce the interval to 3,750 to 5,000 miles or 6 months. Always follow the Maintenance Minder system in your vehicle, which calculates oil life based on actual driving conditions.
Overfilling engine oil can cause several serious problems:
- Oil foaming: Crankshaft whipping aerates the oil, reducing lubrication
- Increased pressure: Can blow out seals and gaskets
- Catalytic converter damage: Excess oil can enter exhaust system
- Reduced performance: Increased drag on rotating components
- Spark plug fouling: Oil can enter combustion chambers
If overfilled, drain excess oil immediately to the proper level on the dipstick.
Yes, all Honda Passport models feature the Maintenance Minder System that monitors driving conditions and calculates remaining oil life. The system displays a percentage on the instrument cluster and will indicate when service is needed with coded messages (Maintenance Code A or B). Code A indicates oil change needed, while Code B indicates oil change plus additional inspections. Always reset the system after completing oil service.
Not recommended. Honda specifically requires synthetic 0W-20 oil for the Passport. Conventional oil doesn’t meet the performance requirements for modern Honda engines, particularly for:
- Extended drain intervals (7,500-10,000 miles)
- Protection of the Variable Cylinder Management system
- High temperature stability in direct injection engines
- Cold start protection in winter conditions
Using conventional oil may void your warranty and could lead to premature engine wear.
