24Car-Repair.com
Professional Automotive Calculators & Technical Guides
Chevrolet Caprice Engine Oil Capacity: Complete Technical Guide (1965-2017)
This comprehensive guide provides detailed specifications, calculations, and maintenance procedures for all Chevrolet Caprice generations. Understanding the precise oil capacity of your Caprice is critical for maintaining optimal engine performance, longevity, and fuel efficiency.
The Chevrolet Caprice has evolved through three distinct generations, each with unique engine configurations requiring specific oil capacities. Incorrect oil levels can lead to increased wear, reduced performance, and potential engine damage.
Oil Capacity Calculator
Use the interactive calculator below to determine the exact oil capacity for your specific Chevrolet Caprice model. The calculator accounts for filter changes and provides generation-specific oil recommendations.
Detailed Specifications by Generation
The following table provides comprehensive oil capacity data for all Chevrolet Caprice models manufactured between 1965 and 2017. All measurements are in US quarts at standard operating temperature.
Complete Oil Capacity Reference Table
| Generation | Years | Engine | Capacity (with filter) | Capacity (without filter) | Recommended Oil | Filter Part # |
|---|---|---|---|---|---|---|
| Classic | 1965-1976 | 327ci / 350ci V8 | 4.0 quarts | 3.5 quarts | SAE 10W-30 | ACDelco PF-25 |
| Classic | 1977-1990 | 305ci / 350ci V8 | 5.0 quarts | 4.5 quarts | SAE 10W-30 | ACDelco PF-44 |
| B-Body | 1991-1996 | 5.7L LT1 V8 | 6.0 quarts | 5.5 quarts | SAE 5W-30 | ACDelco PF-46 |
| PPV | 2011-2013 | 6.0L L77 V8 | 6.2 quarts | 5.7 quarts | Dexos1™ 5W-30 | ACDelco PF-48 |
| PPV | 2014-2017 | 6.0L L77 V8 | 6.2 quarts | 5.7 quarts | Dexos1™ 5W-30 | ACDelco PF-64 |
Conversion Reference
| US Quarts | Liters | Imperial Quarts | Approx. Weight (lbs) |
|---|---|---|---|
| 4.0 quarts | 3.8 liters | 3.3 imperial quarts | 7.5 lbs |
| 5.0 quarts | 4.7 liters | 4.2 imperial quarts | 9.4 lbs |
| 6.0 quarts | 5.7 liters | 5.0 imperial quarts | 11.3 lbs |
| 6.2 quarts | 5.9 liters | 5.2 imperial quarts | 11.7 lbs |
Step-by-Step Oil Change Procedure
Required Tools & Materials
-
Correct amount of oil (as calculated above)
-
Oil filter (generation-specific ACDelco part)
-
Oil drain pan (minimum 8-quart capacity)
-
Socket set (13mm-15mm for drain plug)
-
Oil filter wrench (size varies by generation)
-
Funnel and shop towels
Procedure Details
Step 1: Engine Preparation – Start engine and allow to run for 5-10 minutes to warm oil to operating temperature (approximately 200°F). This thins the oil for more complete drainage.
Step 2: Drain Oil – Position drain pan under oil pan. Remove drain plug with 13mm or 15mm socket. Allow oil to drain completely (minimum 15 minutes). Inspect drain plug magnet for metal particles.
Step 3: Filter Replacement – Remove old oil filter using appropriate wrench. Clean filter mating surface on engine. Apply thin coat of new oil to filter gasket. Install new filter hand-tight plus ¾ turn (do not over-tighten).
Step 4: Refill Oil – Reinstall drain plug with new washer (torque to 18 ft-lbs). Add 90% of calculated oil capacity through funnel. Wait 2 minutes, then check dipstick. Add remaining oil in small increments until reaching “Full” mark.
Step 5: Final Checks – Start engine and run for 1 minute. Check for leaks around filter and drain plug. Turn off engine, wait 2 minutes, then re-check oil level. Add oil if necessary to reach “Full” mark.
Frequently Asked Questions (FAQ)
Below are answers to the most common questions about Chevrolet Caprice oil capacity and maintenance.
